Coat rod. The coat rod shall be a plated steel rod or plated steel tube used on standard commercial storage and wardrobe cabinets that are similar to those described. The rod shall support rigidly capacity loads of evenly distributed heavy clothing. It shall be located in the wardrobe compartment and shall clear the underside of the hat shelf or the underside of the top, depending on size of the cabinet. It shall be securely attached to the hat shelf or to the top. The rod shall span the wardrobe or cabinet compartment from side-to-side to the extent that it will permit clothing to be hung across the entire width of the compartment interior.
Type I. All type I cabinets shall be equipped with six adjustable shelves.
Type II. All type II cabinets shall be equipped with six adjustable shelves, or vertical dividing partition, one coat rod and two coat hooks. The type II, size 1 cabinet shall be equipped with a hat shelf. The specified hooks shall be on the right side of the wardrobe compartment.
Type III. All type III cabinets shall be equipped with a coat rod. Sizes 1 and 3 shall be equipped with a nonadjustable hat shelf.
Assembly hardware. Hardware necessary for assembly of knocked down cabinets shall be segregated by basic sizes, packaged and identified to facilitate set-up. Assembly instructions shall be provided.
Finish. The finish shall be semi-gloss baked enamel. Colors shall be as specified in the contract or order; black shall match Federal Standard No. 595 Color No. 27040; parchment shall be within the range - delineated by Federal Standard No. 595 Nos. 26586 and 26405.
Identification label. The label shall have the contractor’s name or trademark, contract number, NSN (if specified), month and year of manufacture legibly marked in dark ink. The label shall be located on the inside of the cabinet, approximately midpoint between the top and bottom. The label shall not be removable by hand without defacement after being affixed for four hours.
Workmanship. The workmanship shall be of the quality to produce finished wardrobe and storage of the quality to cabinets acceptable in
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business